CHARACTERISTICS

Catalogue and custom solution under one roof

Manufacturers in fluid power and drive technology combine a standard range with customer-specific versions and assemblies. Margin is created where both are costed and managed cleanly and separately.

Customised solutions are the USP. They bind customers but only pay off with clear surcharge logic.

Complexity is the cost trap. Every variant adds parts, test steps and stock that no costing shows.

Lead time sells. Customers order where delivery is fast and on time.

Service drives earnings. The installed base secures high-margin business but is rarely managed actively.

Market situation · As of November 2026

Revenue is stabilising, capacity utilisation not yet

German fluid power generated revenue of EUR 8.3 billion in 2025, 2 per cent less than in the previous year in nominal terms; drive technology, at an estimated EUR 17.6 billion, was also 2 per cent down. For 2026, the VDMA expects nominal growth of 3 per cent in both areas. Their customers in mechanical engineering are far from that: the VDMA expects real production to fall by 2 per cent in 2026, the fourth decline in a row, and domestic orders from January to September 2026 were at the previous year's level.

In Switzerland, the tech industry grew in the first half of 2026, driven almost exclusively by large companies. SME revenues fell by 3.8 per cent, and at 81.1 per cent, capacity utilisation was below the long-term average of 85.6 per cent.

When customers produce less, a component manufacturer can only grow through market share and service. Both require delivery capability and costing that shows where money is made.

Sources: VDMA Fluid Power and VDMA Power Transmission Engineering, Hannover Messe 2026; VDMA, forecast of 17.09.2026 and order intake of 04.11.2026; Swissmem, press release of 24.08.2026.

EUR 8.3 bn

Revenue of fluid power Germany 2025

−2%

nominal, compared with the previous year

+3%

Fluid power forecast 2026, nominal

−2%

Production forecast, mechanical engineering Germany 2026, real

0%

Domestic orders, mechanical engineering Germany, Jan.–Sep. 2026, real

−3.8%

Revenue of Swiss tech SMEs, first half of 2026

Early warning signals

How to recognise that action is needed

A weak quarter can have one-off causes. It becomes critical when patterns repeat. The following structural signals show that the cause lies within the company itself – in structures and processes – long before it becomes visible in the income statement.

  • Die Liefertreue sinkt oder genügt nicht. Zugesagte Termine werden regelmässig verfehlt, und Kunden müssen nachfragen.
  • Die Durchlaufzeiten liegen über den Erwartungen des Marktes. Aufträge gehen an schnellere Wettbewerber, oft ohne dass es jemand merkt.
  • Special requests are accepted without surcharge logic. The additional effort in design, production and testing remains unpaid.
  • Standard and special orders run through the same planning. Urgent special orders crowd out the catalogue range, and commitments to customers become uncertain.
  • The installed base is unknown. Who uses which products is not recorded; service and spare parts are not actively sold.
  • The range grows without a modular system. Every enquiry creates new parts instead of a combination of existing modules.
  • Sales sells what is requested. Target industries and new customers are not approached systematically.
  • Quality problems are sorted out, not solved. Causes are not traced back into design and production.
Strukturelle Frühwarnsignale in der Fluidtechnik: Liefertreue, Durchlaufzeit, Sonderwünsche, Planung, Service, Programm, Vertrieb und Qualität (nicht abschliessend)

The list is not exhaustive. If several signals apply, the cause usually lies in structures and processes, not in a single order. The Corporate Health Check shows exactly where: an independent assessment across ten dimensions of the company with prioritised fields of action.

More about the Corporate Health Check

Levers

Five levers for earnings and liquidity

Earnings and liquidity rarely depend on a single department. Growth, margin, complexity, efficiency and cash influence each other and should therefore be considered together.

Growth. Identify profitable customer industries and applications, actively sell service and spare parts on the installed base and win new customers via a weighted pipeline. New segments are opened up as part of a transformation.

Margin. Cost standard and special versions separately, introduce transparent surcharge logic and review the purchasing of components, castings and machined parts. These are typical building blocks of an optimisation.

Complexity. Streamline the range and switch to a modular system that covers more customer requirements with fewer parts. More on this in the article Peak performance through strategic focus.

Efficiency. Plan standard and special orders separately and shorten assembly and testing times. How this succeeds with your own teams is shown by Operational Excellence.

Cash. Manage components and semi-finished goods using ABC/XYZ logic, set coverage targets and make purchase commitments visible. If liquidity is tight, working capital becomes the core of a restructuring.

Fünf Hebel für Ergebnis und Liquidität in Fluid- und Antriebstechnik: Wachstum, Marge, Komplexität, Effizienz und Cash mit typischen Ansatzpunkten

KPIS

Which KPIs management in fluid power and drive technology should see every month

The early warning signals show where structures and processes are weak. KPIs measure where the company stands and whether measures are working. A few reliable figures are enough – monthly, comparable and forward-looking.

  • Order intake and book-to-bill ratio: show early whether the order backlog is growing or shrinking.
  • Contribution margin of standard versus special versions: shows whether the additional effort is paid for.
  • On-time delivery: the share of orders delivered on the promised date.
  • Delivery time per product group: shows whether you deliver faster or slower than your customers expect.
  • Share of revenue and margin from service and spare parts: shows how much the installed base contributes to earnings.
  • Test failure and rework rate: shows where quality costs time and money.
  • Inventory coverage per item group: shows how much capital is tied up in inventories.
  • Purchase commitments: make future cash outflows visible before they occur.
CEO-Cockpit Fluid- und Antriebstechnik: Auswahl monatlicher Kennzahlen zu Markt und Service, Lieferung, Beständen und Ergebnis

The selection is not exhaustive; which KPIs fit depends on the business model. In the CEO cockpit, we bring these KPIs together on three levels, from management to the core process.

More about the CEO cockpit

IN DEPTH

Two tools that work particularly well for component manufacturers

Beitrag: Sortimentsbereinigung – wann sich ein Artikel nicht mehr rechnet

Product range rationalisation: when an item no longer pays its way

A positive contribution margin is not enough. The article shows how three test criteria per product group reveal which items no longer carry their complexity, and what a rationalisation frees up.

Read the article
Beitrag: Kennzahlen definieren

Defining KPIs

How a business goal becomes a KPI that management trusts: in four steps from the lever to the KPI profile, using on-time delivery as an example.

Read the article

Our key topics

With tailored approaches and proven methods, we support you in aligning and developing your company — independently, and starting from your current economic situation.

Transformation: engineering and office area of an industrial company

Transformation

Sharpen your strategy and develop a holistic alignment to realize growth opportunities.

Learn more
Optimization: production area with assembly workstations and material flow

Optimization

Increase your problem-solving capacity and develop your organization from mediocrity to peak performance.

Learn more
Restructuring: production hall with machinery and operator workstations

Restructuring

Secure your company's viability through structural interventions and sustainable earnings optimization.

Learn more
Turnaround: production area of an industrial company with machinery and employees in motion

Turnaround

Secure your company's liquidity and continued existence and restore its earning power for the long term.

Learn more

EXPERIENCE

Management and hands-on experience from industry

Our team combines management experience with technical, hands-on experience from industry. We know manufacturing companies not only from analyses but also from being responsible for results, employees and customers. That is why we speak the same language as your management and your production, and our solutions work in everyday operations.

More about us

FREQUENTLY ASKED QUESTIONS

Frequently asked questions about consulting in fluid power and drive technology

Which companies in fluid power and drive technology does 10-P Consult work for?

For manufacturers of hydraulic and pneumatic components, drives, gearboxes, pumps and valves as well as customer-specific assemblies with around 30 to 500 employees in German-speaking Switzerland and southern Germany.

How do you separate the costing of standard and special versions?

We record the actual additional effort of special versions in design, production and testing and derive a transparent surcharge logic from it. This shows which special requests are worthwhile.

How do you shorten delivery times?

By planning standard and special orders separately, eliminating bottlenecks in assembly and testing and placing inventories where customers expect fast delivery. More inventory is rarely the solution.

Is it worth expanding the service business?

Usually yes, if the installed base is known. We examine the potential, prices and availability of spare parts and services and build a separately managed business from them.

What if the situation is already critical?

Then securing liquidity takes priority. On request, we take over interim management or the role of Chief Restructuring Officer as part of a consulting mandate.

More about turnaround

How does a collaboration begin?

With an assessment of where you stand. The Quick Health Check takes five minutes to complete and shows what state your company is in and which fields of action offer the greatest leverage – as a five-page profile, reviewed by an experienced consultant and free of charge.

ASSESSMENT

Where does your company stand?

The Quick Health Check takes five minutes to complete and shows what state your company is in and which fields of action offer the greatest leverage – as a five-page profile, reviewed by an experienced consultant and free of charge.